4-68 Nau'in Centrifugal Fan 4-68 jerin belt Driven Type Industry Centrifugal Blower

4-68 Series Belt Kore Centrifugal Fan

I: manufa

Nau'in 4-68 centrifugal fan (nan gaba ana kiransa fan) ana iya amfani da shi azaman iskar iska gabaɗaya, kuma yanayin aikinsa sune kamar haka:

1. Shafin aikace-aikacen: a matsayin iska na cikin gida na masana'antu na gabaɗaya da manyan gine-gine, ana iya amfani da shi azaman iskar gas ko iskar gas.

2.Iype na iskar gas;iska da sauran kone-kone ba tare da bata lokaci ba, mara lahani ga jikin mutum, mara lahani ga kayan karfe.

3. Najasa a cikin iskar: ba a yarda da abubuwa masu ɗaki a cikin iskar ba, kuma ƙurar da ƙurar da ke cikin ta sun fi 150mg/m3.

4. Gas zafin jiki: ba zai wuce 80 ℃.

Ⅱ: Nau'i

1. Ana yin fanka zuwa tsotsa guda ɗaya, tare da Lambobin ƙira 12, gami da No.2.8, 3.15,3.55,4,4.5, 5,6.3,8, 10,12.5, 16,20, da dai sauransu.

2. Ana iya yin kowane fanni da jujjuyawar dama ko jujjuyawar hagu iri biyu, daga ƙarshen fuskar motar, jujjuyawar agogon agogo, wanda aka sani da madaidaicin juyawa, zuwa dama, jujjuyawar agogo, wanda aka sani da fan mai jujjuyawar hagu. Zuwa hannun hagu.

3. Matsayin fitarwa na fan yana bayyana ta hanyar ma'auni na inji.Hagu da dama na iya yin 0,45,90,135,180 da 225.

4. Fan drive yanayin: A, B, C, D hudu, No.2.8 ~ 5 dauko nau'in A, fitar da kai tsaye tare da mota, fan impeller, gidaje gyarawa kai tsaye a kan mota shaft da flange; No.6.3 ~ 12.5 rungumi cantilever na'ura mai tallafawa, wacce za'a iya raba nau'ikan tuki guda biyu: nau'in C (belt drive belt pulley a waje da bearing) da nau'in D (coupling drive) No.16 da 20 sune na'urori masu tallafawa nau'in B, tare da bel ɗin bel da bel ɗin bel. a tsakiyar ɗaki

IⅢ: Halayen tsarin manyan abubuwa

Model 4-68 fan No.2.8 ~ 5 ne yafi hada da impeller, gidaje, iska mashiga da sauran sassa na rarraba kai tsaye mota mota, No.6.3 ~ 20 ban da sama sassa da kuma watsa part.

1.Tsokaci.12 tilting reshe ruwan wukake suna welded tsakanin mazugi baka dabaran murfin da lebur disc.Duk sanya daga karfe farantin karfe, da kuma ta tsaye da kuma tsauri ma'auni gyara, mai kyau iska yi, high dace, m aiki.

2.Housing: gidan yana da siffar cochlear wanda aka yi masa walda da farantin karfe na yau da kullun.Gidan yana cikin nau'i biyu daban-daban. No.16,20 an raba gidaje zuwa kashi biyu tare da jirgin sama na tsakiya, kuma rabi na sama ya kasu kashi biyu tare da layin tsakiya na tsaye, wanda aka haɗa da kusoshi.

3.Air mashigai a matsayin wani m tsarin na convergent streamline, an gyarawa a kan mashiga gefen fan tare da kusoshi.

4.Transmission kungiyar: hada da spindle, hali akwatin, mirgina hali, bel pulley ko hada guda biyu, da dai sauransu Babban shaft da aka yi da high quality steel.Four Fans na inji size, overall tsarin da hali akwatin, sanye take da ma'aunin zafi da sanyio da man alade. a kan ɗaukar nauyi.Magoya bayan na'ura mai lamba No.16 zuwa 20 suna amfani da tubalan guda biyu masu kama da juna, sanye take da ma'aunin zafi da sanyio a kan ma'aunin, mai mai mai maiko.

IV: Shigarwa, daidaitawa da gwajin gwajin fan

1. Kafin shigarwa: duk sassan fan ɗin za a bincika su sosai don ganin ko sassan sun cika, ko injin ɗin da mahalli suna cikin shugabanci iri ɗaya na juyawa, ko sassan suna da alaƙa sosai, ko impeller, spindle, bearing. da sauran manyan sassa sun lalace, kuma ko rukunin watsawa yana da sassauƙa, da sauransu. Idan an sami matsaloli, za a gyara su nan take.2.A lokacin shigarwa: kula da dubawa na harsashi, harsashi bai kamata ya fada cikin ko barin kayan aiki ko sundries ba, don hana tsatsa, rage matsalolin ƙaddamarwa, ya kamata a rufe shi da wasu man shafawa ko man na'ura.Lokacin da ake haɗawa. fanka tare da tushe, bututun iska a ciki da waje ya kamata a daidaita su don dacewa da dabi'a.Kada a tilasta haɗin haɗi, kuma kada a ƙara nauyin bututu zuwa kowane bangare na fan, kuma a tabbatar da matsayi na kwance na fan.

3. Bukatun shigarwa:

1) shigar bisa ga matsayi da girman da aka nuna a cikin zane.Domin tabbatar da babban inganci, girman shaft da radial yarda na tuyere da impeller ya kamata a ba da garantin musamman.

2) lokacin shigar nau'in No. 6.3-12.5d magoya baya, a kwance matsayi na fan sandal da coaxiality na mota shaft za a tabbatar, da kuma shigarwa na hada guda biyu dole ne hadu da fasaha bukatun na roba hada guda biyu shigarwa.

3) bayan shigarwa: yi ƙoƙarin buga rukunin watsawa don bincika ko akwai matsi sosai ko yanayin karo, kuma daidaita sassan da ba daidai ba idan an same su.

V: Umarnin oda

Lambar fan, ƙarar iska, matsa lamba, kusurwar fitarwa, jagorar juyawa, ƙirar motar, iko, saurin juyawa, da sauransu Dole ne a nuna lokacin yin oda.

VI: Bayanin samfur